 |
|
|
|
|
Contact Us At:
Phone: 1 (757) 671-3211
Fax: 1 (757) 671-8784
E-Mail:
(click here)
         |
|
"COMMITTED TO THE FLEET" |
|
|
Toggle Bolts, Rings and Wing Nuts/Toggle Pins |
|
|
|
Request for quote on these items, should be accompanied by the below information: |
|
Toggle Bolts - (1) Type of material - Brass, Bronze, or Stainless Steel (Cres); (2) Diameter and threads per inch, such as 3/4-10; (3) Type of thread - Standard, National Coarse, or Acme Thread (Acme Thread has a flat surface, vs, the standard pointed thread); (4) Thread length, number of inches, or, full length; (5) Diameter of toggle eye; (6) Outside diameter of toggle eye; (7) Length from center of eye to end. If in doubt, please furnish sample. |
| Ring or Wing Nuts - (1) Type of material - Brass, Bronze, or Stainless Steel (Cres); (2) Diameter and threads per inch, such as 5/8-11; (3) Type of thread - Standard, National Coarse, or Acme Thread (Acme Thread has a flat surface, vs, the standard pointed thread); (4) Outside diameter of ring, or, width of wing span. |
| Toggle Pins - (1) Type of material - Naval Brass, Galv. Steel, Stainless Steel (Cres), Bronze, Aluminum, and Monel; (2) Diameter; (3) Diameter or ring eye; (4) O.D. or ring eye; (5) Collar diameter; (6) Collar thickness; (7) Grip length (measured from inner edge of shoulder to beginning of toggle slot). *Toggle pins are available with brass clevis and wire lanyard assy. *Specify length of lanyard. |
|
|
